Lesson 5 - Material Application in Brewing SAQ
This lesson allows you to test yourself on the material covered in the lesson Material Application in Brewing and to determine the level to which you have met the learning outcomes.
Suggested Response - Q2
*For each material provide a typical application in the brewery.
|
Material |
Application |
|
Epoxy resin |
|
|
Polypropylene |
|
|
Copper |
|
|
3CR12 |
|
|
EPDM |
|
|
Titanium |
|
|
Galvanised steel |
|
|
Mild steel |
|
|
PTFE |
|
|
HDPE |
|
|
Glass |
|
|
SS304 |
|
|
SS316L |
|
|
SS2205 |
|
Response:
|
Material |
Application Example(s) |
|
Epoxy resin |
Floor covering |
|
Polypropylene |
Mash and beer filter plates |
|
Copper |
Cladding, water pipes, sometimes as a brewing vessel |
|
3CR12 |
Abrasive material handling, spent grain discharge and spent grain silos |
|
EPDM |
Gaskets and seals |
|
Titanium |
Heat exchanger plates in a de-aeration plant or wort cooler |
|
Galvanised steel |
Grain silos, equipment supports, walkways, railings and building structures |
|
Mild steel |
Fences, gates, building, some dry raw material handling areas |
|
PTFE |
Valve liners, gaskets and seals |
|
HDPE |
Flowtainers, water pipes, drains, sometimes as fermenters in small scale brewing |
|
Glass |
Sightglasses |
|
SS304 |
Fermenters, storage vessels, bright beer tanks, and pipes |
|
SS316L |
Brewhouse vessels, pipes and equipment |
|
SS2205 |
Hot liquor tanks and hot de-aeration plants |