Lesson 7 - Wort Separation Process Control SAQ
This lesson provides the opportunity for you to test yourself on the material covered in Lesson 6 on ‘Wort Separation Process Control’. It will allow you to determine the level to which you have attained the learning outcomes.
Suggested Response - Q6
**When mash separation starts to run slower than normal, which two variables of Darcy’s Law are likely to have changed?
Response:
Darcy’s law:
For a given situation, the cross-sectional area A, bed depth L, and ΔP are constant. The two variables that are likely to have caused reduced flow are a decrease in grain bed permeability K and an increase in viscosity μ.
Grain bed permeability will decrease with a finer grind. A plansifter analysis will identify if this is the case.
If we assume no increase in wort gravity, no reduction in wort temperature, and no increase in mash shear, then a viscosity increase will have come from a change in the malt. Reduced malt modification and consequent increased levels of beta glucan/arabinoxylan will increase wort viscosity. The malt certificate of analysis will confirm this if so.